Acrylic processing is a process referred to as, in front of acrylic processing article http: / / www.yyfchina.com / view_1006.html in some details of the environment has made the detailed introduction. In the acrylic material processing mechanical lathe cutting and cutting, drilling machine for drilling, but also in520and other special glue adhesive into various shapes of acrylic products, such as acrylic, acrylic smoke model mobile phone display stand, acrylic cosmetics display rack and so on, these are our common life. But in the acrylic processing process, under the condition of high temperature, injection blow molding, extrusion, plastic resin molding method is processed into a large model aircraft, acrylic fish tank, acrylic transparent building http: / / www.yyfchina.com / view_1063.html and other large acrylic processing products, small acrylic processing products such as: acrylic toothbrush, acrylic, acrylic, toothpick box bathroom supplies a variety of all sorts of strange things acrylic crafts.

The next source square explain some acrylic processing engineering should pay attention to the local. First, the ordinary acrylic sheets at a temperature of about 100 degrees around the time will be deformed, above this temperature the processed acrylic products will lose the unique characteristics of acrylic. In second, the hardness of acrylic, acrylic board surface hardness equivalent of only in the use of aluminum, or acrylic processing time should be very careful to avoid scratching the surface gloss, lost. In third, acrylic processing electrostatic, in the summer or dry degree of very tall acrylic processing workshop is easy to generate static electricity, dust absorption. Clean it with a soft cotton cloth dipped in soapy water or azure water to wipe. In fourth, acrylic casting plate in acrylic processing process have a coefficient of expansion, so in the acrylic plate stacked or acrylic processing must take leave enough acrylic plate telescopic space.